Transaction Paper Abstracts - September 2015 (IEEE Transactions on Energy Conversion)

Listed below are the papers and letters that have been published in the September 2015 issue of the IEEE Transactions on Energy Conversion with links to their abstracts. The deadline for submitting discussions is 30 November 2015.

Regular Papers

Wang, R.; Pekarek, S.; Bash, M.L.; Larson, A.; Maaren, R.V., "Incorporating Dynamics in a Mesh-Based Magnetic Equivalent Circuit Model of Synchronous Machines"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2403773

Sapena-Bano, A.; Pineda-Sanchez, M.; Puche-Panadero, R.; Perez-Cruz, J.; Roger-Folch, J.; Riera-Guasp, M.; Martinez-Roman, J., "Harmonic Order Tracking Analysis: A Novel Method for Fault Diagnosis in Induction Machines"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2416973

Kim, T.; Wang, Y.; Sahinoglu, Z.; Wada, T.; Hara, S.; Qiao, W., "A Rayleigh Quotient-Based Recursive Total-Least-Squares Online Maximum Capacity Estimation for Lithium-Ion Batteries"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2424673

Milicua, A.; Abad, G.; Rodriguez Vidal, M.A., "Online Reference Limitation Method of Shunt-Connected Converters to the Grid to Avoid Exceeding Voltage and Current Limits Under Unbalanced Operation—Part I: Theory"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2395718

Milicua, A.; Abad, G.; Rodriguez Vidal, M.A., "Online Reference Limitation Method of Shunt-Connected Converters to the Grid to Avoid Exceeding Voltage and Current Limits Under Unbalanced Operation—Part II: Validation"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2395717

El-Naggar, A.; Erlich, I., "Fault Current Contribution Analysis of Doubly Fed Induction Generator-Based Wind Turbines"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2398671

Takiguchi, M.; Sugimoto, H.; Kurihara, N.; Chiba, A., "Acoustic Noise and Vibration Reduction of SRM by Elimination of Third Harmonic Component in Sum of Radial Forces"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2401398

Dolisy, B.; Mezani, S.; Lubin, T.; Leveque, J., "A New Analytical Torque Formula for Axial Field Permanent Magnets Coupling"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2424159

Vun, S.T.; McCulloch, M.D., "Optimal Design Method for Large-Scale YASA Machines"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2397342

Chen, X.; Wei, Z.; Gao, X.; Ye, C.; Wang, X., "Research of Voltage Amplitude Fluctuation and Compensation for Wound Rotor Brushless Doubly-Fed Machine"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2416515

Liu, H.; Chen, Z., "Contribution of VSC-HVDC to Frequency Regulation of Power Systems With Offshore Wind Generation"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2417130

Sedrine, E.B.; Ojeda, J.; Gabsi, M.; Slama-Belkhodja, I., "Fault-Tolerant Control Using the GA Optimization Considering the Reluctance Torque of a Five-Phase Flux Switching Machine"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2402234

Rashid, G.; Ali, M.H., "Transient Stability Enhancement of Doubly Fed Induction Machine-Based Wind Generator by Bridge-Type Fault Current Limiter"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2400220

Ye, C.; Yu, K.; Xu, W.; Zhang, H., "Optimal Design and Experimental Research of a Capacitor-Charging Pulsed Alternator"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2395446

Cai, H.; Xu, L., "Modeling and Control for Cage Rotor Dual Mechanical Port Electric Machine–Part I: Model Development"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2400931

Cai, H.; Xu, L., "Modeling and Control for Cage Rotor Dual Mechanical Port Electric Machine—Part II: Independent Control of Two Rotors"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2400971

Kojooyan-Jafari, H.; Monjo, L.; Corcoles, F.; Pedra, J., "Using the Instantaneous Power of a Free Acceleration Test for Squirrel-Cage Motor Parameters Estimation"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2399697

Tinazzi, F.; Zigliotto, M., "Torque Estimation in High-Efficency IPM Synchronous Motor Drives"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2408214

Li, H.; Shen, Y., "Thermal Analysis of the Permanent-Magnet Spherical Motor"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2419636

Esfandiari, G.; Ebrahimi, M.; Tabesh, A.; Esmaeilzadeh, M., "Dynamic Modeling and Analysis of Cascaded DFIMs in an Arbitrary Reference Frame"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2416273

Zhao, D.; Gao, F.; Massonnat, P.; Dou, M.; Miraoui, A., "Parameter Sensitivity Analysis and Local Temperature Distribution Effect for a PEMFC System"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2404793

Song, Y.; Nian, H., "Enhanced Grid-Connected Operation of DFIG Using Improved Repetitive Control Under Generalized Harmonic Power Grid"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2416357

Kim, D.; Moon, Y.; Nam, H., "A New Simplified Doubly Fed Induction Generator Model for Transient Stability Studies"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2422841

Lei, T.; Barnes, M.; Smith, S.; Hur, S.; Stock, A.; Leithead, W.E., "Using Improved Power Electronics Modeling and Turbine Control to Improve Wind Turbine Reliability"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2422792

Qin, Z.; Blaabjerg, F.; Loh, P.C., "A Rotating Speed Controller Design Method for Power Leveling by Means of Inertia Energy in Wind Power Systems"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2416004

Saarinen, L.; Norrlund, P.; Lundin, U., "Field Measurements and System Identification of Three Frequency Controlling Hydropower Plants"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2425915

Ruan, J.; Lu, Z.; Qiao, Y.; Min, Y.; Shao, G.; Xu, X.; Hou, K., "Transient Stability of Wind Turbine Adopting a Generic Model of DFIG and Singularity-Induced Instability of Generators/Units With Power–Electronic Interface"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2423689

Zhao, C.; Yin, H.; Yang, Z.; Ma, C., "Equivalent Series Resistance-Based Energy Loss Analysis of a Battery Semiactive Hybrid Energy Storage System"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2418818

Al-Badri, M.; Pillay, P.; Angers, P., "A Novel In Situ Efficiency Estimation Algorithm for Three-Phase IM Using GA, IEEE Method F1 Calculations, and Pretested Motor Data"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2421288

Prieto-Araujo, E.; Junyent-Ferre, A.; Lavernia-Ferrer, D.; Gomis-Bellmunt, O., "Decentralized Control of a Nine-Phase Permanent Magnet Generator for Offshore Wind Turbines"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2412550

Zhang, Y.; Yang, H., "Model-Predictive Flux Control of Induction Motor Drives With Switching Instant Optimization"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2423692

Kim, J.; Shin, S.; Lee, S.B.; Gyftakis, K.N.; Drif, M.; Cardoso, A.J.M., "Power Spectrum-Based Detection of Induction Motor Rotor Faults for Immunity to False Alarms"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2423315

Letters

Laldin, O.; Sudhoff, S.D.; Pekarek, S., "Modified Carter's Coefficient"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2415457

Laldin, O.; Sudhoff, S.D.; Pekarek, S., "Magnetizing End-Effects in Salient Pole Machines"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2415454

Special Section Papers

Ma, C.; Qu, L., "Multiobjective Optimization of Switched Reluctance Motors Based on Design of Experiments and Particle Swarm Optimization"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2411677

Tan, Z.; Song, X.; Cao, W.; Liu, Z.; Tong, Y., "DFIG Machine Design for Maximizing Power Output Based on Surrogate Optimization Algorithm"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2411153

Safaei, F.; Suratgar, A.A.; Afshar, A.; Mirsalim, M., "Characteristics Optimization of the Maglev Train Hybrid Suspension System Using Genetic Algorithm"
Link to abstract: http://dx.doi.org/10.1109/TEC.2014.2388155

Kim, S.; Kim, C.; Jung, S.; Kim, Y., "Optimal Design of Novel Pole Piece for Power Density Improvement of Magnetic Gear Using Polynomial Regression Analysis"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2421355

Pakdelian, S.; Deshpande, Y.B.; Toliyat, H.A., "Design of an Electric Machine Integrated with Trans-Rotary Magnetic Gear"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2415799

Laldin, O.; Sudhoff, S.D.; Pekarek, S., "Analysis and Design of Hybrid Machines for DC Generation"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2413295

Si, J.; Feng, H.; Ai, L.; Hu, Y.; Cao, W., "Design and Analysis of a 2-DOF Split-Stator Induction Motor"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2418578

Arbab, N.; Wang, W.; Lin, C.; Hearron, J.; Fahimi, B., "Thermal Modeling and Analysis of a Double-Stator Switched Reluctance Motor"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2424400

Abdi, S.; Abdi, E.; McMahon, R., "A Study of Unbalanced Magnetic Pull in Brushless Doubly Fed Machines"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2394912

Kiani, M.M.; Wang, W.; Lee, W., "Elimination of System-Induced Torque Pulsations in Doubly-Fed Induction Generators Via Field Reconstruction Method"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2427258

Alexandridis, A.T.; Konstantopoulos, G.C.; Zhong, Q., "Advanced Integrated Modeling and Analysis for Adjustable Speed Drives of Induction Motors Operating With Minimum Losses"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2392256

Crider, J.M.; Sudhoff, S.D., "An Inner Rotor Flux-Modulated Permanent Magnet Synchronous Machine for Low-Speed High-Torque Applications"
Link to abstract: http://dx.doi.org/10.1109/TEC.2015.2412547

Barzegaran, M.R.; Youssef, T.A.; Berzoy, A.; Mohammed, O.A., "Electric Machine Drive Design Improvements Through Control and Digital Signal Processing Techniques"
Link to abstract: http://dx.doi.org/10.1109/TEC.2014.2375382

Back to Top