Transaction Paper Abstracts - December 2018 (IEEE Transactions on Energy Conversion)

Listed below are the papers that have been published in the December 2018 issue of the IEEE Transactions on Energy Conversion with links to their abstracts. The deadline for submitting discussions is 28 February 2019.

Papers

M. G. Angle, J. H. Lang, J. L. Kirtley, Jr., S. Kim and D. Otten, "Modeling of Surface Permanent Magnet Motors With Cogging and Saturation Effects Included"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2849926

R. Shah, R. Preece and M. Barnes, "The Impact of Voltage Regulation of Multiinfeed VSC-HVDC on Power System Stability"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2831692

J. Li, K. Wang and C. Liu, "Torque Improvement and Cost Reduction of Permanent Magnet Machines With a Dovetailed Consequent-Pole Rotor"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2832184

B. Bijukumar, A. G. K. Raam, S. I. Ganesan and C. Nagamani, "A Linear Extrapolation-Based MPPT Algorithm for Thermoelectric Generators Under Dynamically Varying Temperature Conditions"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2830796

Y. Yang, M. M. Rahman, T. Lambert, B. Bilgin and A. Emadi, "Development of an External Rotor V-Shape Permanent Magnet Machine for E-Bike Application"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2847311

D. Bazargan, B. Bahrani and S. Filizadeh, "Reduced Capacitance Battery Storage DC-Link Voltage Regulation and Dynamic Improvement Using a Feedforward Control Strategy"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2837627

N. Lin, S. Ci, D. Wu and H. Guo, "An Optimization Framework for Dynamically Reconfigurable Battery Systems"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2850853

Y. Wu, B. Cai and Q. Ma, "An Online Diagnostic Method for Rotary Diode Open-Circuit Faults in Brushless Exciters"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2831241

J. Sun, C. Luo and S. Xu, "Improvement of Tubular Linear Oscillating Actuators by Using End Ferromagnetic Pole Pieces"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2840319

F. Ben Abid, S. Zgarni and A. Braham, "Distinct Bearing Faults Detection in Induction Motor by a Hybrid Optimized SWPT and aiNet-DAG SVM"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2839083

S. Gradev and H. Herzog, "Integration of Iron-Loss Resistance Into Dynamic Models of 2 x 3-Phase Hybrid-Excited Synchronous Machine"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2841856

S. Cho, J. Hwang and C. Kim, "A Study on Vibration Characteristics of Brushless DC Motor by Electromagnetic-Structural Coupled Analysis Using Entire Finite Element Model"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2833493

H.-C. Moon, J.-S. Lee and K.-B. Lee, "A Robust Deadbeat Finite Set Model Predictive Current Control Based on Discrete Space Vector Modulation for a Grid-Connected Voltage Source Inverter"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2830776

D. Zeng, G. Lv and T. Zhou, "Equivalent Circuits for Single-Sided Linear Induction Motors With Asymmetric Cap Secondary for Linear Transit"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2840057

M. K. Bakhshizadeh, F. Blaabjerg, J. Hjerrild, Ł. Kocewiak and C. L. Bak, "Improving the Impedance-Based Stability Criterion by Using the Vector Fitting Method"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2849347

J. L. Gonzalez-Cordoba, R. A. Osornio-Rios, D. Granados-Lieberman, R. d. J. Romero-Troncoso and M. Valtierra-Rodriguez, "Thermal-Impact-Based Protection of Induction Motors Under Voltage Unbalance Conditions"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2834487

F. Kazhamiaka, S. Keshav, C. Rosenberg and K. Pettinger, "Simple Spec-Based Modeling of Lithium-Ion Batteries"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2838441

H. Li, J. Peng, Y. Zhou, J. He, Z. Huang, L. He and J. Pan, "SoH-Aware Charging of Supercapacitors With Energy Efficiency Maximization"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2841427

C. López-Torres, A. Garcia, J. Riba, G. Lux and L. Romeral, "Computationally Efficient Design and Optimization Approach of PMa-SynRM in Frequent Operating Torque–Speed Range"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2831249

R. Smolenski, G. Benysek, M. Malinowski, M. Sedlak, S. Stynski and M. Jasinski, "Ship-to-Shore Versus Shore-to-Ship Synchronization Strategy"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2839702

A. Rahideh, A. Ghaffari, A. Barzegar and A. Mahmoudi, "Analytical Model of Slotless Brushless PM Linear Motors Considering Different Magnetization Patterns"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2840712

X. Wang, D. W. Gao, J. Wang, W. Yan, W. Gao, E. Muljadi and V. Gevorgian, "Implementations and Evaluations of Wind Turbine Inertial Controls With FAST and Digital Real-Time Simulations"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2849022

X. Huang, Z. Qian, Q. Tan, J. Li and B. Zhou, "Suppressing the Thrust Ripple of the Permanent Magnet Linear Synchronous Motors With Different Pole Structures by Setting the Modular Primary Structures Differently"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2842077

Z. Z. Wu, Z. Q. Zhu, C. Wang, J. C. Mipo, S. Personnaz and P. Farah, "Influence of DC Winding Configuration on Its Induced Voltage in Wound Field Machines"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2846567

A. Takbash and P. Pillay, "Magnetization and Demagnetization Energy Estimation and Torque Characterization of a Variable-Flux Machine"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2837893

C. Sun, D. Sun, Z. Zheng and H. Nian, "Simplified Model Predictive Control for Dual Inverter-Fed Open-Winding Permanent Magnet Synchronous Motor"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2841012

S. Xu and H. Ren, "Analytical Computation for AC Resistance and Reactance of Electric Machine Windings in Ferromagnetic Slots"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2843357

X.-K. Liu, H. He, Y.-W. Wang, Q. Xu and F. Guo, "Distributed Hybrid Secondary Control for a DC Microgrid via Discrete-Time Interaction"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2850279

H. Dehghan, F. Haghjoo and S. M. A. Cruz, "A Flux-Based Differential Technique for Turn-to-Turn Fault Detection and Defective Region Identification in Line-Connected and Inverter-Fed Induction Motors"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2837389

D. Borkowski, "Analytical Model of Small Hydropower Plant Working at Variable Speed"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2849573

S. Ebrahimi, N. Amiri, Y. Huang, L. Wang and J. Jatskevich, "Average-Value Modeling of Diode Rectifier Systems Under Asymmetrical Operation and Internal Faults"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2832652

I. Kiaei, S. Lotfifard and A. Bose, "Secure Loss of Excitation Detection Method for Synchronous Generators During Power Swing Conditions"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2844198

R. Ma, Z. Li, E. Breaz, B. Pascal and F. Gao, "Numerical Stiffness Analysis for Solid Oxide Fuel Cell Real-Time Simulation Applications"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2849930

Special Section Papers

T. Sheng and S. Niu, "A Novel Zero-Sequence-Current-Based Dual-Stator Biased-Flux Machine"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2843775

F. Dong, J. Zhao, J. Song, Y. Feng and Z. He, "Optimal Design of Permanent Magnet Linear Synchronous Motors at Multispeed Based on Particle Swarm Optimization Combined With SN Ratio Method"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2841421

Y. Liu, J. Ou, F. Schreiner, M. Lao, M. Noe and M. Doppelbauer, "Design of a Superconducting DC Demonstrator for Wind Generators"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2846721

J. Zhu, K. W. E. Cheng and X. Xue, "Design and Analysis of a New Enhanced Torque Hybrid Switched Reluctance Motor"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2876306

M. Lim and J. Hong, "Design of High Efficiency Wound Field Synchronous Machine With Winding Connection Change Method"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2847728

J. Wang and N. J. Baker, "A Linear Laminated Cylindrical Transverse Flux Machine for Use With a Free Piston Engine"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2877502

Z. Zhang, Y. Liu and J. Li, "A HESM-Based Variable Frequency AC Starter-Generator System for Aircraft Applications"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2867906

N. J. Baker, M. A. H. Raihan, A. A. Almoraya, J. W. Burchell and M. A. Mueller, "Evaluating Alternative Linear Vernier Hybrid Machine Topologies for Integration Into Wave Energy Converters"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2873913

W. Zhao, H. Shen, T. A. Lipo and X. Wang, "A New Hybrid Permanent Magnet Synchronous Reluctance Machine With Axially Sandwiched Magnets for Performance Improvement"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2876938

C. Guo, S. Huang, J. Wang and Y. Feng, "Research of Cryogenic Permanent Magnet Synchronous Motor for Submerged Liquefied Natural Gas Pump"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2868954

C. Ye, X. Liang, F. Xiong, J. Yang, W. Xu and Y. Liu, "Design of an Axial-Flux PM-Assisted Claw-Pole Generator Based on an Equivalent Magnetic Circuit Model"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2841864

J.-W. Kwon and B.-i. Kwon, "High-Efficiency Dual Output Stator-PM Machine for the Two-Mode Operation of Washing Machines"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2866915

S. Mukundan, H. Dhulipati, C. Lai, K. Mukherjee, J. Tjong and N. C. Kar, "Design and Optimization of Traction IPMSM With Asymmetrical Damper Bars for Integrated Charging Capability Using Evolutionary Algorithm"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2877104

H. Yang, S. Lyu, Z. Q. Zhu, H. Lin, S. Wang, S. Fang and Y. Huang, "Novel Dual-Stator Machines with Biased Permanent Magnet Excitation"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2866464

H. Fan, K. T. Chau, L. Cao and C. Jiang, "Design and Analysis of a New Bipolar-Flux DSPM Linear Machine"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2848545

F. Yu, W. Zhang, Y. Shen and J. Mao, "A Nine-Phase Permanent Magnet Electric-Drive-Reconstructed Onboard Charger for Electric Vehicle"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2844793

X. Zhao and S. Niu, "Design and Optimization of a Novel Slot-PM-Assisted Variable Flux Reluctance Generator for Hybrid Electric Vehicles"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2847292

X. Ren, D. Li, R. Qu, Z. Yu and Y. Gao, "Investigation of Spoke Array Permanent Magnet Vernier Machine With Alternate Flux Bridges"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2846259

Z. He, F. Dong, J. Zhao, L. Wang, J. Song and X. Song, "Thrust Ripple Reduction in Permanent Magnet Synchronous Linear Motor Based on Electromagnetic Damping-Spring System"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2866418

M. Cheng, J. Wang, S. Zhu and W. Wang, "Loss Calculation and Thermal Analysis for Nine-Phase Flux Switching Permanent Magnet Machine"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2837910

Y. Zhou, R. Qu, C. Shi and Y. Gao, "Analysis of Thrust Performance of a Dual-Mover Linear Vernier Machine With Horizontal-Magnetized PM Arrays"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2867903

Y. Gao, D. Li, R. Qu, H. Fang, H. Ding and L. Jing, "Analysis of a Novel Consequent-Pole Flux Switching Permanent Magnet Machine With Flux Bridges in Stator Core"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2839727

W. Tong, S. Wang, S. Dai, S. Wu and R. Tang, "A Quasi-Three-Dimensional Magnetic Equivalent Circuit Model of a Double-Sided Axial Flux Permanent Magnet Machine Considering Local Saturation"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2853265

X. Bao, J. Fang, C. Di and S. Xu, "A Novel Computational Method of Skewing Leakage Reactance for a Doubly Skewed Rotor Induction Motor"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2848631

Y. Fan, Q. Zhang, W. Wang and X. Zhou, "Speed Regulation System of a Flux-Modulated Permanent-Magnet In-Wheel Motor Based on Sliding Mode Control and Adaptive Notch Filter"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2859338

J. Zhu, H. Bai, X. Wang and X. Li, "Current Vector Control Strategy in a Dual-Winding Fault-Tolerant Permanent Magnet Motor Drive"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2876512

R. Cui, Y. Fan and C. Li, "On-Line Inter-Turn Short-Circuit Fault Diagnosis and Torque Ripple Minimization Control Strategy Based on OW Five-Phase BFTHE-IPM"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2851615

G. Yang, M. Lin, N. Li, G. Tan and B. Zhang, "Flux-Weakening Control Combined With Magnetization State Manipulation of Hybrid Permanent Magnet Axial Field Flux-Switching Memory Machine"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2864556

S. Shi, X. Wang, S. Zheng, Y. Zhang and D. Lu, "A New Diode-Clamped Multilevel Inverter With Balance Voltages of DC Capacitors"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2863561

W. Xu, D. Dong, Y. Liu, K. Yu and J. Gao, "Improved Sensorless Phase Control of Stand-Alone Brushless Doubly-Fed Machine Under Unbalanced Loads for Ship Shaft Power Generation"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2865594

A. Balamurali, G. Feng, C. Lai, J. Tjong and N. C. Kar, "Maximum Efficiency Control of PMSM Drives Considering System Losses Using Gradient Descent Algorithm Based on DC Power Measurement"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2852219

M. C. Gardner, M. Johnson and H. A. Toliyat, "Comparison of Surface Permanent Magnet Axial and Radial Flux Coaxial Magnetic Gears"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2865200

X. Zhu, W. Wu, S. Yang, Z. Xiang and L. Quan, "Comparative Design and Analysis of New Type of Flux-Intensifying Interior Permanent Magnet Motors With Different Q-Axis Rotor Flux Barriers"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2837119

C. Liu, "Emerging Electric Machines and Drives - An Overview"
Link to abstract: http://dx.doi.org/10.1109/TEC.2018.2852732

Back to Top