July 2019

Print
Flat View
July 2019

Tue. 2 Jul, 2019

PES Webinar - Rating of Underground Power Cables with Boundary Temperature Restrictions – a 2019 PES Prize Paper (Tue. 2 Jul, 2019 11:00 am - 12:00 pm)

Rating of Underground Power Cables with Boundary Temperature Restrictions – a 2019 PES Prize Paper

July 2, 2019 • 11:00 am ET

Presented by: Dr George Anders, aco-Anders Con

Click Here for Details and to Register

This Webinar:

This webinar will present the 2019 PES Prize Paper entitled “Rating of Underground Power Cables with Boundary Temperature Restrictions”. This paper is selected as one of two PES prize papers among about 2000 papers published in all PES transactions over the past 3 years. The subject of the paper is about a new cable rating method for actual industry applications. The usual way of rating the electric power cables is to compute the current such that the conductor temperature does not exceed the specified limit. The procedures for ampacity calculations are well established and are part of several international and national standards. However, in several countries, another restriction is imposed on the maximum current the cable can carry. This restriction limits the temperature rise at a point other than the cable conductor. In North America, a notion of the “boundary” temperature limit is sometimes entertained. The boundary can refer to the cable surface but also to the edge of the duct bank or a backfill. The paper proposes new solutions to such problem including calculation of the dynamic ratings. It not only introduces a computational procedure to calculate ampacities based on boundary temperature restrictions but also illustrates how the new algorithm can be applied in practice for several cable design situations.

Register Here

The Presenter:

Dr George Anders

George Anders is a president of Anders Consulting company in Toronto. Between 1975 and 2012 he has been employed by Ontario Hydro and Kinectrics in Toronto, Canada. He is also a professor in the Faculty of Electrical and Electronic Engineering of the Technical University of Lodz in Poland. For many years, Dr. Anders has been Ontario Hydro’s resource person responsible for the development of power cable calculation methods and application of advanced techniques in power system analysis. He is the author of two monographs on cable current rating calculations published by IEEE in the Power Engineering Series. Dr. Anders is a recipient of 2016 IEEE Herman Halperin Awards in Transmission and Distribution and 2018 IEEE Roy Billinton Award in Power System Reliability.

Mon. 8 Jul, 2019

2019 IEEE PES Transactive Energy Systems Conference (TESC 2019) (Mon. 8 Jul, 2019 8:00 am - Wed. 10 Jul, 2019 5:00 pm)

Date: Monday, July 8 - Wednesday, July 10, 2019

Location:  Minneapolis, MN, USA

Website:  https://ieee-tesc.org/

Contact:  Ron Melton

Email: ron.melton@pnnl.gov

Tue. 9 Jul, 2019

2019 IEEE PES Transactive Energy Systems Conference (TESC 2019) (Mon. 8 Jul, 2019 8:00 am - Wed. 10 Jul, 2019 5:00 pm)

Date: Monday, July 8 - Wednesday, July 10, 2019

Location:  Minneapolis, MN, USA

Website:  https://ieee-tesc.org/

Contact:  Ron Melton

Email: ron.melton@pnnl.gov

Wed. 10 Jul, 2019

2019 IEEE PES Transactive Energy Systems Conference (TESC 2019) (Mon. 8 Jul, 2019 8:00 am - Wed. 10 Jul, 2019 5:00 pm)

Date: Monday, July 8 - Wednesday, July 10, 2019

Location:  Minneapolis, MN, USA

Website:  https://ieee-tesc.org/

Contact:  Ron Melton

Email: ron.melton@pnnl.gov

Tue. 16 Jul, 2019

Meet the Committee - Energy Storage & Stationary Battery Committee (ESSB) (Tue. 16 Jul, 2019 2:00 pm - 3:00 pm)

IEEE Power & Energy Society Meet the Committee Webinar Series
Meet the Committee - Energy Storage & Stationary Battery Committee (ESSB)


July 16 2019 • 2:00 pm EST


Presented by: Curtis Ashton, ESSB Chair
Director of Training, American Power Systems (a division of East Penn Mfg's Deka Services)


Click Here for Details and to Register


This Webinar:
This webinar will review the mission and scope of the IEEE PES Energy Storage & Stationary Battery Committee (ESSB). It will include an overview of the work conducted by each of the groups who report to the larger technical committee from the current ESSB Chair, Curtis Ashton.


It will also include information on how to get involved.


The scope of the ESSB Committee is four-fold in purpose:
1. Develop and publicsh standards (standards, best practices and guides) that apply to the safety, performance and maintenance of energy storage and stationary battery systems, along with related DC systems and ancillary devices.
2. Conduct or sponsor relevenat technical sessions and webinars, participate in approriate technical conferences, as well as publish technical articles, papers and reports that enlighten the industry on related energy storage and stationary battery matters. 

3. Seek experience SME's from all areas of energy storage and stationary battery experience to help establish the ESSB Committee as a responsible and leading voice in energy storage and stationary batteries.
4. Liaise with other technical committees, societies and groups concerned with various aspects of energy storage and battery systems in order to present as coordinated message as possible.
Note: See the ESSB Policies and Procedures or Operating Procedures manuals for a full and official description of the ESSB Scope.

Register Here

The Presenter:

Curtis Ashton  is the present chair of the IEEE PES Energy Storage and Stationary Battery (ESSB) Committee.  He has an extensive history in standards making and power and battery-  related conferences, including also serving a term on the IEEE Standards Association Review Committee (RevCom), past vice-president of IEEE PELS TC7 (Intelec), chair of the Battcon Technical Committee, and past vice-chair of ANSI A TIS STEP.  Mr. Ashton has been published numerous times, and is an experienced speaker/presenter.  He had a 27 year career as a power and grounding expert for a large telecom company, preceded by a 4 yr career as an Engineering Technician for an electric utility.  He presently works as the Training Director for a DC power services company that is a wholly owned subsidiary of a very large battery manufacturer.

Wed. 24 Jul, 2019

2019 IEEE PES Nuclear Power Engineering Committee Meeting (NPEC) (Wed. 24 Jul, 2019 8:00 am - Fri. 26 Jul, 2019 5:00 pm)

Date: Wednesday, July 24 - Friday, July 26, 2019
Location: Williamsburg, VA, USA
Website: http://sites.ieee.org/pes-npec/calendar/

Thu. 25 Jul, 2019

2019 IEEE PES Nuclear Power Engineering Committee Meeting (NPEC) (Wed. 24 Jul, 2019 8:00 am - Fri. 26 Jul, 2019 5:00 pm)

Date: Wednesday, July 24 - Friday, July 26, 2019
Location: Williamsburg, VA, USA
Website: http://sites.ieee.org/pes-npec/calendar/

Fri. 26 Jul, 2019

2019 IEEE PES Nuclear Power Engineering Committee Meeting (NPEC) (Wed. 24 Jul, 2019 8:00 am - Fri. 26 Jul, 2019 5:00 pm)

Date: Wednesday, July 24 - Friday, July 26, 2019
Location: Williamsburg, VA, USA
Website: http://sites.ieee.org/pes-npec/calendar/

Powered by JCal Pro - the Joomla Calendar